Skip to content
ProleanTech
Get a Quote →

ENGINEERING GUIDE

خدمة تصنيع النايلون باستخدام الحاسب الآلي

الصفحة الرئيسية > المواد > نايلون Materials · Nylon خدمة تصنيع النايلون باستخدام الحاسب الآليMachined polyamide, published here as 1 subtype — 30% glass-filled — with the tolerance, minimum wall and lead time the shop…

خدمة تصنيع النايلون باستخدام الحاسب الآلي

Materials · Nylon

خدمة تصنيع النايلون باستخدام الحاسب الآلي

Machined polyamide, published here as 1 subtype — 30% glass-filled — with the tolerance, minimum wall and lead time the shop holds.

أطلب عرض سعر
قارن بين جميع المواد الـ 23
1Subtype published
± 0.25mmAchievable · ISO 2768
سماكة 0.80 ملمجدار صغير
3-10 أيامPublished lead time
White machined nylon (PA) brackets and spacers after CNC machining

S1 · Specifications

What we hold on nylon

Six numbers a buyer asks for before sending a drawing. Everything here is
already published on this page — nothing is extrapolated.

طريقة عملنا
CNC mill · CNC lathe3-axis and 5-axis milling, turning
التسامح القابل للتحقيق
Not lower than  ±0.25 mm (±0.010"),Based on the drawing, ISO 2768
جدار صغير
سماكة 0.80 ملمVaries with the wall-to-linear-dimension ratio
الحجم الأقصى للجزء
200 × 80 × 100 سمLargest envelope quoted online
المهلة
3-10 أيامComplex parts sit at the far end
فرقة السعر
$$Where nylon sits against the other 22 materials
اقرأ هذا أولاً. Process, maximum part size and lead time are
identical on all 23 material pages — they describe the shop, not the material. They sit
here as a one-line constant instead of taking a column each in a nine-column table, which
is how they were published before. The three that genuinely change material by material
are tolerance, minimum wall and price band.

S2 · Published subtype

The nylon subtype published on this page

The subtype this site publishes for nylon, and the family it belongs to. The third column repeats the applications named on the page it replaces — nothing added.

Subtype · as published in the Nylon At a Glance table

Subtype publishedعائلة البوليمراتApplications named on this page
نايلون (30٪ مملوءة بالزجاج)Polyamide (PA), glass-filledAutomotive, toys, tents, ropes, conveyors, seat belts, clothing
Only one subtype is published. The At a Glance table this
page replaces lists a single entry — Nylon (30% Glass-Filled). Unfilled nylon, other
glass loadings and impact-modified grades are not published here. That is a limit on
what the page lists, not on what the shop quotes: name the grade or the property you
need on the drawing and it is confirmed in writing.

S3 · Which polymer?

Four questions, then a material

This page used to answer none of these. Each card points at a page that
already exists on this site — written before this redesign, and previously linked from
nowhere on this page.

Does the part have to take repeated impact without cracking?
The two pages to compare are this one, ABS and polycarbonate — all three are on this site, and the choice is usually made on the impact the part has to survive.
عضلات المعدهالبولي كربونات
Compare the polymers →
Does the part slide, rub or wear against something?
Delrin and PTFE both have pages here and both are chosen for sliding contact. This page and those two are the three to compare.
دلرينPTFE
See the polymer pages →
Will it see chemicals, or sit outdoors for years?
PVC and PTFE are the two pages here that turn up for chemical service. The machinability guide covers why the resin, not the machine, sets the cutting data.
مواد PVCالتشغيل في الماكينات
Read the machinability guide →
Prototype first, or a production part?
The part is the same cut either way. The moulding and printing pages cover the routes a machined part can move to once volume changes.
حقن صبالطباعة 3D
See all 23 materials →

S4 · Machining & tolerance

What governs the part you get

The published tolerance on this page is Not lower than  ±0.25 mm (±0.010"),
on the drawing, to ISO 2768. Where a feature needs better than that, say so on the
drawing — that conversation belongs before the tool goes in, not after.

التفاوتات العامة وفقًا لمعيار ISO 2768What we hold when the drawing stays silentTolerance & fits standardThe shop standard behind the number aboveإرشادات سوق دبي الماليWall thickness, fillets, thread depth — read before you drawقابلية تصنيع الموادWhy some grades cut slower, and what that costs

S5 · Finishes

Finishing a nylon part

This is the polymer set of finishes: polishing, blasting, sanding and fine machining. The metal pages list the plating and heat-treatment routes instead.

طلاءSheen and clarity controlالتفجير حبةUniform matt textureAs-machined / deburringTool marks left, edges brokenالسلس بالقطعA finishing cut, not a coatingالرمليHand step before polishingالآلات الدقيقةTighter Ra bandجميع النتائج الـ 20With Ra bands and process notes

S6 · Applications

Where nylon earns its cost

  • Automotive & conveyingAutomotive parts, conveyor components and seat belts
  • Leisure & consumerالألعاب
  • Outdoor & textileTents, ropes and clothing

All of it cut on the same floor —
انظر تعريف التصنيع باستخدام الحاسب الآلي و
how we hold tolerance.

A CNC mill cutting a large white circular nylon (polyamide) workpiece
A nylon (polyamide) workpiece after a CNC cut, as machined — shop gallery image.

S7 · Further reading

Five pages worth reading before you pick

All published, all on this site, none of them linked from this page before
this redesign.

اختيار الموادالمواد المشتركة للتصنيع باستخدام الحاسب الآليWhere the plastics sit next to the metalsقراءة →
التشغيل في الماكيناتMachinability of material and its relation with CNC machiningWhat the cutting data is really telling youقراءة →
التسامحNavigating the precision of ISO 2768: a guide to standard tolerancingHow the general-tolerance standard readsقراءة →
Other polymerدلرينThe page buyers usually compare nylon againstقراءة →
طريق بديلحقن صب الخدمةThe other way to make the same part in volumeقراءة →

S8 · FAQ

7 questions nylon buyers actually ask

Every answer traceable: published figures from this page, published pages
from this site. No new claims.

Which nylon grades can you machine?
The At a Glance table this page replaces publishes one subtype — Nylon (30% Glass-Filled) — and that is the only nylon grade listed on this page. Unfilled and other glass loadings are not listed, which is a limit on what is published, not on what is quoted: name the grade or the property you need on the drawing and it is confirmed in writing.
What tolerance can you hold?
±0.25 mm, on the drawing, to ISO 2768 — the figure published on this page. Where a feature needs tighter than that, mark it on the drawing so it is priced and inspected as a controlled feature.
What is the smallest wall and the largest part?
Minimum wall is 0.80 mm. Maximum envelope is 200 × 80 × 100 cm. Both are shop-wide constants, identical on all 23 material pages.
How fast is a nylon part?
3 to 10 days, with complex parts at the far end. Post-processing, if you ask for it, is a separate step and adds to that window.
Which finish should I ask for?
The cards in the finishes section above are the polymer set — تلميع, تفجير حبة و as-machined / deburring among them. The full list of 20 is at التشطيبات السطحية.
ما هي الملفات التي يجب عليّ إرسالها؟
STEP, STP, IGES, IGS, SLDPRT, STL, DXF, DWG, PDF, DOCX, JPG, JPEG, PNG or ZIP. A 2D PDF plus the model is the combination that gets quoted fastest.
هل سيتم الحفاظ على سرية رسوماتي؟
Uploads stay with the people quoting and making the part. If you need a mutual NDA in place first, say so on نموذج الاتصال and it is arranged before files change hands.

الخطوة التالية

Send the drawing — we come back with the material call and the price

Upload the model and the 2D PDF. You get a manufacturability note, a note on the resin if the drawing leaves it open, and a price.

أطلب عرض سعر
جميع المواد الـ 23

جميع التحميلات آمنة وسرية.

  • Quoted in 1 business day on a clean drawing
  • The resin and fill stated in writing on the quote
  • First article inspected before the run
(function(){ /* 吸顶锚点条 top：取「真实占住屏幕上方的固定元素」高度（本站桌面站头是 static ⇒ 0；手机档为第三方手机菜单 58px） */ function hdr(){var b=0;try{var c=document.querySelectorAll('.et-l--header .et_pb_sticky_module,.et-l--header > *,#main-header,.et_pb_section_0_tb_header');[].slice.call(c).forEach(function(e){var r=e.getBoundingClientRect(),s=window.getComputedStyle(e);if((s.position==='fixed'||s.position==='sticky')&&r.height>20&&r.height<400&&r.top<4)b=Math.max(b,Math.round(r.bottom));});}catch(e){}if(b)return b;var n=parseFloat(document.body.style.paddingTop);return isNaN(n)?0:n;} function apply(){var _h=hdr();window.__mpvHdr=_h;document.documentElement.style.setProperty('--pb-hdr',_h+'px');} apply(); window.addEventListener('resize',apply); /* 站头只在滚动后才 fixed：加载时探不到 ⇒ 滚动后重算。 rAF 节流 + 120ms 防抖：滚动中只排定时器，停止后才真正读几何， 避免每帧 getBoundingClientRect/getComputedStyle 造成 layout thrashing。 */ var _raf=0,_ht=0; window.addEventListener('scroll',function(){if(_raf)return; _raf=window.requestAnimationFrame(function(){_raf=0;window.clearTimeout(_ht);_ht=window.setTimeout(apply,120);});},{passive:true}); /* 锚点落点自算：捕获阶段抢先 + 落点校正兜底 */ var _bar=document.querySelector('.abar'); function _mpvWant(){return (window.__mpvHdr||0)+(_bar?_bar.getBoundingClientRect().height:0)+10;} function _mpvJump(el){var w=_mpvWant(); var top=el.getBoundingClientRect().top+window.pageYOffset-w; window.scrollTo({top:top6){window.scrollTo({top:Math.max(0,r.top+window.pageYOffset-w),behavior:'auto'});}}; if('onscrollend' in window){window.addEventListener('scrollend',_settle,{once:true});} setTimeout(_settle,1500); if(history.replaceState)history.replaceState(null,'',h); },true);} var links=[].slice.call(document.querySelectorAll('.abar a')); var secs=links.map(function(a){return document.querySelector(a.getAttribute('href'));}); if('IntersectionObserver' in window){ var io=new IntersectionObserver(function(es){ es.forEach(function(e){ if(!e.isIntersecting) return; var i=secs.indexOf(e.target); if(i<0) return; links.forEach(function(l,j){l.classList.toggle('on',j===i);}); }); },{rootMargin:'-118px 0px -60% 0px',threshold:0}); secs.forEach(function(s){if(s) io.observe(s);}); } })();
{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","itemListElement":[{"@type":"ListItem","position":1,"name":"الصفحة الرئيسية","item":"https:\/\/proleantech.com\/"},{"@type":"ListItem","position":2,"name":"المواد ","item":"https:\/\/proleantech.com\/materials\/"},{"@type":"ListItem","position":3,"name":"نايلون","item":"https:\/\/proleantech.com\/materials\/nylon\/"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which nylon grades can you machine?","acceptedAnswer":{"@type":"Answer","text":"The At a Glance table this page replaces publishes one subtype — Nylon (30% Glass-Filled) — and that is the only nylon grade listed on this page. Unfilled and other glass loadings are not listed, which is a limit on what is published, not on what is quoted: name the grade or the property you need on the drawing and it is confirmed in writing."}},{"@type":"Question","name":"What tolerance can you hold?","acceptedAnswer":{"@type":"Answer","text":"±0.25 mm, on the drawing, to ISO 2768 — the figure published on this page. Where a feature needs tighter than that, mark it on the drawing so it is priced and inspected as a controlled feature."}},{"@type":"Question","name":"What is the smallest wall and the largest part?","acceptedAnswer":{"@type":"Answer","text":"Minimum wall is 0.80 mm. Maximum envelope is 200 × 80 × 100 cm. Both are shop-wide constants, identical on all 23 material pages."}},{"@type":"Question","name":"How fast is a nylon part?","acceptedAnswer":{"@type":"Answer","text":"3 to 10 days, with complex parts at the far end. Post-processing, if you ask for it, is a separate step and adds to that window."}},{"@type":"Question","name":"Which finish should I ask for?","acceptedAnswer":{"@type":"Answer","text":"The cards in the finishes section above are the polymer set — polishing, bead blasting and as-machined \/ deburring among them. The full list of 20 is at surface finishes."}},{"@type":"Question","name":"ما هي الملفات التي يجب عليّ إرسالها؟","acceptedAnswer":{"@type":"Answer","text":"STEP, STP, IGES, IGS, SLDPRT, STL, DXF, DWG, PDF, DOCX, JPG, JPEG, PNG or ZIP. A 2D PDF plus the model is the combination that gets quoted fastest."}},{"@type":"Question","name":"هل سيتم الحفاظ على سرية رسوماتي؟","acceptedAnswer":{"@type":"Answer","text":"Uploads stay with the people quoting and making the part. If you need a mutual NDA in place first, say so on the contact form and it is arranged before files change hands."}}]},{"@type":"Service","name":"خدمة تصنيع النايلون باستخدام الحاسب الآلي","url":"https:\/\/proleantech.com/ar\/materials\/nylon\/","provider":{"@type":"Organization","name":"Prolean Technology Co., Ltd.","url":"https:\/\/proleantech.com\/"},"areaServed":"Worldwide"}]}